Neutrik NAC3 MPA-1

Industrial Connectors / PowerConLocking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. Fast and easy locking system. High current capacity (20 A rated). Extremely robust and reliable. Meets all prevailing safety standards. UL recognized, VDE certified and SEV approved. Very good cable handling and protection. Note: The PowerCon is a connector without breaking capacity, i.e. the PowerCon should not be connected or disconnected under load or live!

Mounting connector for 5 - 15 mm cable O.D. rangePremating safety ground

Quicklock with securing lever

With the two non-interchangeable types of connectors (A-type, B-type) it is impossible to produce a short circuit

Appropriate plugs are identified by mechanical keyways and by color

• Connector type: Powercon (gray)
• Plug construction: Mounting version

Made in Europe

• IP classification: IP20
• Weight: 0,01 kg
• Number of contacts: 2 + PE
• Rated current per contact: 20 A RMS
• Rated voltage: 250 V AC
• Dielectric strength: 4000 V DC

Contact resistance:

• Insulation resistance after damp heat test: >,100 Mohms
• Creepage distance: according to IEC 664-1
• Cable retention force: = 220 N, depending on cable dia and material
• Wiring: Flat tabs for FASTON 4.8 mm x 0.5 mm (0.187'' x 0.02'') or soldering
• Solderability: complies with IEC 68-2-20
• Housing: PA 6 30% GR
• Insert: PA 6 30% GR
• Contacts: CuZn39Pb3 / CuSn6
• Contact surface: L+N 20 m Ag plated, Earth 4 m Ag plated
• Chuck: POM
• Temperature range: -30C to +80C
• Flammability: UL94HB